TS-CSTV24 Satellite TV Surge Protector

Model 

TS-CSTV24 

Rated voltage (max. continuous voltage) 

Uc

24V- 

Nominal current

I_L

2A

Lightning Impulse Current (10/350) 

I_imp

0.5KA 

Nominal discharge current (8/20) 

In

2.5KA 

Voltage protection level at In 

Up

≤300V (line-shield)   

Voltage protection level at 1kV/ms 

Up

≤60V (line-shield)   

Frequency range

F

5-3000MHz

Insertion loss

a_E

1.2dB (5-862MHz)

1.4dB (862-2400MHz)       2dB (2400-3000MHz)

Return loss (input/output)

a_R

≥ 14dB (5-47MHz)

≥ 18dB (47-3000MHz)

Shield attenuation

a_S

≥ 85dB (5-300MHz)        ≥ 80dB (300-470MHz)

≥ 75dB (470-1000MHz)     ≥ 55dB (1000-3000MHz)

Surge impedance

Z

75Ω

Response time

R

≤ 1ns (line-shield)

Operating temperature range 

-40°C...+80°C 

Connection (input / output) 

F socket 

Shield earthing

Screw terminal

Mounting on 

35mm DIN rail 

Enclosure material 

Aluminum 

Standards 

IEC 61643-21;  GB 18802.21;  YD/T 1542 

Certification

CE(LVD,EMC)

INSTALLATION INSTRUCTION

1. This TV Surge Protector is connected in series to the protected device.

2. Mount the TV Surge Protector on 35 mm DIN rail.

3. The out terminal should be connected to the protected devices.

4. TV Surge Protector's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.

5. After above, you should ensure the circuit is functioning.

Regularly inspect the operating status, especially after lightning. Once the communication is off,  electrician should check/replace the TV Surge Protector.

INSTALLATION DIAGRAM

WARNING:

1, The device must be installed by electrically skilled person, conforming to national standards and safety regulations.

2, It is recommended that installation should be done under power off condition.