TS-DP10 LSA110 Telephone Surge Protection Device

Model

TS-DP10 LSA110 

Nominal voltage

U_n

110V-

Rated voltage (max. continuous voltage)

Uc

120V- / 84.6V~

Nominal current

I_L

180mA

Nominal discharge current (8/20)

In

5kA (per line)

Voltage protection level at 1KV/µS

Up

≤ 180V (l ine-PG)

Response time

t_A

≤ 1ns (line-line)

≤ 1ns (line-PG)

Bandwidth

f_G

10.0MHz ( line -PG)

Series impedance per line

R

22Ω

Capacitance

C

≤1nF (l ine-PG)

Relative humidity

≤95% (25°C)

Operating temperature range

-40°C~ - +80°C

Pluggable into

LSA-PLUS disconnection block

Earthing via

Earthing BusBar

Enclosure material

Orange thermoplastic material  , UL94-V0

Standards

IEC 61643-21 & GB 18802.21

Certification

CE (LVD, EMC & RoHS)

Installation instruction 

1．The Telephone Surge Protection Device must be installed in correct direction.

2．Plug earthing BusBar into input terminal of LSA-PLUS disconnection block

3．Plug this product into the jack of LSA-PLUS disconnection block;make sure earthing terminal is

   contacted fully with earthing BusBar.

Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replacethe SPD. 

Installation diagram

WARNING:  

1. The device must be installed by electrically skilled person, conforming to national standards and 

   safety regulations. 

2. It is recommended that installation should be done under power off condition.