• Product Name :

    TS-24RJ45/5/8 Network Surge Protector

  • Instruction

    ♦ TS 24 ports RJ45 Network Surge Protector is designed according to IEC 61643-21; GB 18802.21; YD/T 1542 to protect network equipment from interruption caused by surge current;. Surge Protector with 24/16 Ports RJ45 interface, all protected by four pairs lines protected.

    Mainly used for ethernet 100BaseT/TX/T4、ATM 155MBit/s、100VG-Any-LAN、CDDI、10Base T(IEEE 802.3)、Token Ring(IEEE 802.5)etc.(e.g. Telecom-munication,server, router,computer, and so on).Module design for standard 19"distribution cabinet.

    Similar / Related Products:

    TS-24RJ45 5 8-Network-Surge-Protector-Warranty

    ♦ Product Size

    TS-24RJ45 5 8-Network-Surge-Protector-Factory

    ♦ Basic Circuit Diagram

    TS-24RJ45 5 8-Network-Surge-Protector-High-Efficiency

    ♦ Technical Data 

    Model 

     

      TS-24RJ45/5/8 

     TS-24RJ45/24/8 

    Nominal voltage 

    Un

    5V- 

    24V-

    Rated voltage (max. continuous voltage) 

    Uc

    6V-

    4.2V~ 

    30V-

    21.1V~

    Nominal discharge current (8/20) 

    In

    300A (line-line)

    300A (line-PG) 

    0.1kA (line-line)

    0.1A (line-PG)

    Max. discharge current (8/20)

    Imax

    400A (line-line)

    400A (line-PG)

    0.2kA (line-line)

    0.2kA (line-PG)

    Voltage protection level at In

    Up

    ≤50V (line-line)

    ≤50V (line-PG)

    ≤60V (line-line)

    ≤60V (line-PG)

    Voltage protection level at 1kV/ms

    Up

    ≤ 13V (line-line)

    ≤ 13V (line-PG)

    ≤ 45V (line-line)

    ≤ 45V (line-PG)

    Capacitance

    C

    ≤ 35pF (line-line)  

    ≤50pF (line-PG)

    ≤ 16pF (line-line)  

    ≤20pF (line-PG)

    Response time

    tA

    ≤1ns (line-line)

    ≤1ns (line-PG)

    ≤1ns (line-line)

    ≤1ns (line-PG)

    Bandwidth

    fG

    165Mbits/s

    300Mbits/s

    Max. data transmission rates

    Vs

    155Mbits/s

    Operating temperature range

     

    -40°C...+80°C

    Relative humidity

     

    ≤95% (25°C)

    Connection (input / output)

     

    RJ45 shield socket

    Pining

     

    1/2, 3/6, 4/5, 7/8

    Shield earthing

     

    Metal enclosure

    Standards

     

    IEC 61643-21; GB 18802.21; YD/T 1542

    Certification

     

    CE(LVD,EMC)

     MAIN CHARACTER 

    1, Low voltage protection level;

    2, Quick response;

    3, Low insertion loss  

    INSTALLATION INSTRUCTION 

    1. This RJ45 Network surge protector is connected in series to the protected device.

    2. Can be mounted in the 19" distribution cabinet..

    3. The out terminal should be connected to the protected devices.

    4. SPD's earthing terminal must be connected to nearby earthing BusBar or the metal earthing enclosure of protected device.

    5. After above, you should ensure the circuit is functioning.

    Regularly inspect the operating status, especially after lightning.Once the communication is off, electrician should check/replace the SPD.

    INSTALLATION DIAGRAM 

    TS-24RJ45 5 8-Network-Surge-Protector-Best-Price

    WARNING 

    1, The device must be installed by electrically skilled person, conforming to national standards and safety regulations.

    2, It is recommended that installation should be done under power off condition.